Drywall Hole and Dent Repair in Wentzville
A hole in a wall is the easiest drywall problem to fix and the easiest to fix badly. We do the right version.
What counts as a hole job
Most calls start the same way. A door swung open too hard. A mount came off the wall with a chunk of board attached. A couch corner caught a dent on move-in day. These are all hole and dent jobs, and they fall into three sizes.
Dents and dings are surface damage. The paper is crushed but the board is still there. These get filled, skimmed and sanded.
Punch-throughs are the doorknob holes and fist-sized breaks. The board behind is gone and needs a real backer and a real patch. Mesh stickers from a hardware store are a shortcut that tends to show through paint.
Cut-outs are the openings a plumber or electrician leaves behind when they chase a pipe or move a box. They are often big, ragged and square-ish, and they need new board set in properly.
Why Wentzville walls get these
Wentzville is a young city. The 2020 census counted 44,372 residents, and it was the fastest-growing city in Missouri by percentage across 2000 to 2020. Growth like that means a steady churn of people moving boxes through hallways and hanging televisions on walls that have never had a hole in them.
About 85 percent of homes here are lived in by their owners, according to Census QuickFacts. Owners tend to want the scar gone, not hidden behind a picture frame. That is a fair instinct, and it is why we patch to disappear instead of patch to cover.
The median home in the city went up around 2007, so the board behind your paint is builder-grade sheetrock from that era. It takes a patch well when the repair is made with the right compound, and it punishes a quick smear of spackle.
Got a hole to close?
Send a photo of the damage and we will tell you what the patch involves.
How we patch
Here is the sequence on a typical punch-through.
- We lay down floor protection and tape off the work zone.
- We square up the hole and set a backer behind it so the new piece has something to grip.
- We cut a piece of board to fit and screw it off.
- We tape the seams and apply setting-type compound for the first fill, because it does not shrink the way premixed mud does.
- We skim two or three thin coats, sanding between them with a vacuum sander to keep dust out of your rooms.
- We prime the patch so paint cures evenly over it.
Thin coats feathered wide beat one thick lump every time. The wide feather is what keeps a patch from showing as a bump when light rakes across the wall.
Hole repair questions
Can you fix a doorknob hole so it does not show?
Yes. We back the opening, set a fitted piece of board, tape and skim it in thin coats, then prime. Once your painter finishes, the doorknob hole stops being a feature of the wall.
What about the holes a TV mount leaves?
Small anchor holes get filled and skimmed flat. A big hole where the mount tore out a chunk gets a proper patch. We pull stray anchors first so nothing rattles loose later.
Do I need to patch before I repaint the room?
Patch first, always. Paint over a damaged spot only highlights it. Let us finish the wall, then paint the whole face corner to corner.
Can you open a wall and close it after the plumber leaves?
That is a common job. We cut a clean opening, or finish a ragged one the trade left behind, then set new board and match the wall around it.
Before we arrive
You do not need to do much. Clear the space around the damage so we can reach it, and move small furniture out of the way. If a mount left anchors behind, leave them. We pull them and fill the holes properly.
If you still have the paint, tell us the name and the sheen. Matching paint is not our job, but a leftover can of the real color saves you a trip later. Send two photos when you reach out: one close, one from across the room. They tell us whether this is a dent or a cut-out before we show up.
One honest limit: if the hole is part of a larger wet or sagging area, it is not a hole job anymore. That is water damage, and the board has to come out past the wet edge.
Ready to lose the scar?
Ring the shop or message us and we will set a time.